K SERIES ENGINE CONVERSION UNIVERSAL SWAP HARNESS This is the conversion harness you need to mount a k-series Honda engine into any chassis! Made to be very easy, simple and clean installation REQUIRES: -Original Honda Civic EP3 Type R engine harness -Original Honda Civic EP3 Type R charge harness Instructions included for diy charge harness if you want to make your own. Alternator and starter connector needed for this.With this harness to get the engine running you will need to wire: - Constant power and switched ignition power. Charge harness - Fuel pump - Starter Making this harness the most complete available, also labeled wires for: - MIL, Oil pressure and Alternator warning lights. Brake switch (for launch control or other function) - RPM and Speed outputs - Fan control Comes complete with main, fuel pump and wideband lambda sensor relays With these full detailed instructions included, wiring installation is extremely easy. Couldn't be any easier! However if you have any question during installation, please contact, we will give you all the tech help you may need!
Contact for questions or any information you may need! Minor modifications needed to ep3 original engine harness for wideband to work (instructions included).
-Will work with original Honda k-series ECU's with immobilizer delete - error for secondary lambda, eld and multiplexor can occur (best to reflash if possible). You will get the harness in the picture and instructions only, no engine harness or charge harness. A fuse holder may be necessary for power wires. Please contact if you have any questions! The item "BWE UNIVERSAL SWAP WIRING Honda Civic Type R K20 engine swap conversion harness" is in sale since Tuesday, August 29, 2017.This item is in the category "Vehicle Parts & Accessories\Car Tuning & Styling\Engine, Tuning & Chips\Wiring Kits". The seller is "joaomnm" and is located in Castelo Branco, Beira Baixa, 6000-242. This item can be shipped worldwide.