Connects2 CTKHD01 Car Stereo Double Din Fitting Kit With KENWOOD Patch Lead For Honda. This complete Double Din Radio Replacement Kit by Connects2. CTKHD01, allows the fitment of a Double DIN aftermarket headunit to the selected vehicle. The kit includes everything you need to complete the installation including fascia, steering stalk controls, and aerial connections. Double Din Fascia Adaptor (Black).
Universal Stereo Patch Lead - SUPPORTS KENWOOD, SONY, PIONEER, ALPINE, CHINA BRANDS, JVC. Not Suitable for Vehicles with the Factory Sat Nav Unit. When installing your new double din stereo DO NOT USE DOUBLE DIN CAGE OR TRIM supplied with the stereo.The new stereo will mount using the double din side plates within the kit. The stereo will mount from behind the fascia and is held in place by these side brackets supplied. No modification is required to the fascia, so please do not attempt to cut the front of the fascia to try and fit the cage supplied with the stereo.
PATCH LEAD This interface connects Kenwood stereo with a joystick input (blue line-in mini-jack) or wire input on the back of the unit to the existing stalk/steering wheel controls of the vehicle. SOME KNOWLEDGE OF CAR AUDIO INSTALLATION IS HELPFUL IN CASE A MODIFICATION IN SOME RARE CASES MAY BE NECESSARY OR NEEDED. PLEASE NOTE: The fascias are made to suit industry standard sized stereos such as Pioneer, Kenwood, Sony, Alpine, JVC etc, NOT INCLUDING China units or unbranded units. China units have a reputation to be over sized and may require modification to the fascia to allow it to fit. We do not take any responsibility for China units not fitting as they are not industry standard size.IMPORTANT NOTE: Please make sure that is the correct Fitting Kit for your car by firstly checking to see if your make, model and year of car is listed in the advert. Secondly by checking to see if the connection in the picture listed is the same as you have in your vehicle.