You can even mount it upside down or on its side! This comprehensive kit arrives with everything you need for a stress-free installation. Whilst it's crucial to keep the oil from overheating, maintaining the correct oil temperature is equally as important. We include a sandwich plate with a built-in thermostat as the oil might not reach its optimal temperature without one, especially on short trips.
A thermostat allows 90% of the oil to bypass the oil cooler until the temperature reaches 92°C (197.6°F). 10% of the oil always circulates through the cooler to prevent air pockets and shocking the system with oil that is too cold. Once the oil reaches the correct temperature, the thermostat fully opens and 100% of the oil gets sent to the cooler. If the oil temperature drops too much the thermostat closes and reduces the amount of the oil going to the cooler.
This keeps the oil temperature safe and in its optimal operating range. If required, we also offer a 82°C (179.6°F) thermostat for specialist applications, please let us know if this is something you need. Mocal or Setrab Proline performance oil cooler. HEL custom aluminium mounting brackets (top and bottom). Thermostatic oil filter sandwich plate with adapters and washers.
HEL performance braided hose (stainless braided or black nylon braided). Straight aluminium reusable braided hose fittings.90 degree aluminium reusable braided hose fittings. This item is in the category "Wholesale & Job Lots\Automotive". The seller is "gobraided" and is located in this country: GB. This item can be shipped worldwide.