Profile dimensions (mm): 77 x 26. Maximum extension of mounting feet (mm): 1350.
T-Track channel width (mm): 21. Maximum speed with mounted roof rack (km/h): 130. The set contains all elements required for assembly and use of the roof rack.2 x 135 cm aluminium bar. 4 x bar ending cap. 4 x mounting foot with lock. 2 x key for the mounting foot. Before purchasing, determine your vehicle's particular roof type.
Standard rails (with clearance between rail and roof). Flush / Integrated rails (without clearance). The offered roof rack is suitable for both: Standard rails (with clearance between rail and roof) and Flush / Integrated rails (without clearance). The key used for adjusting the mounting feet is contained in the set and no additional tools are required. Elements making contact with the car's roof rails are covered with protective rubber in order to prevent scratches.
The aerodynamic shape of the roof bars give them an aesthetically pleasing appearance and reduces air resistance when compared to oval shaped bars, lowering fuel consumption. The grooves on the underside of the roof rack allow for adjustment of the mounting feet, enabling the roof rack to be used on most vehicles with open and flush roof rails. The bars are equipped with a system that permits quick and easy installation as well as dismantling of the majority of available on-the-market accessories using the "T" inserts.
Each of the rack's four feet is equipped with anti-theft protection in the form of a lock, rendering impossible any dismantling by unauthorized persons. To protect the roof rack from moisture and to significantly reduce the noise level caused by air getting inside the profile, an additional gasket was added to seal the bottom groove of the roof rack. The rack boasts a modern design, while maintaining the highest utility values.
It has also undergone rigorous certification tests for compliance with ISO/PAS 11154:2006 and TÜV-GS. The improved ending cap system greatly increases the safety and comfort of using the roof rack. The ending cap can be swung open to gain access to the mounting channel without having to remove it.